1995 960 wagon obd 1 connector

gerard p daily 1 · Post by **gerard p daily 1** » 23 May 2014, 11:05

Greetings From Texas-- I have a 1995 Volvo 960 station wagon non/turbo. I opened the OBD 1 A unit but there is an empty space where the #6 probe socket should be. I have sockets for 1, 2,3 and 5.
When I pulled the connector from the base there are 4 sockets in a row and the next row has 2. The 4th socket is covered up when you put the connector back in the unit and you can't access the socket. The unit is not damaged at all. How can I read the ignition system faults if there is no socket?

Post by **jimmy57** » 23 May 2014, 15:46

that car has the fuel and ignition combined into the one Motronic 1.8 control module. 2 is it for engine stuff.

gerard p daily 1 · Post by **gerard p daily 1** » 23 May 2014, 16:57

Thank you !!