awd-fwd 2001
-
prospectortom
- Posts: 56
- Joined: 15 December 2013
- Year and Model: 1999 S70
- Location: Tennessee
-
prospectortom
- Posts: 56
- Joined: 15 December 2013
- Year and Model: 1999 S70
- Location: Tennessee
Has anyone ever put an 01AWD transmission in an 01FWD car?
-
JDS60R
- MVS Moderator
- Posts: 3532
- Joined: 21 February 2009
- Year and Model: 2007 S60R 2016 XC70
- Location: Mount Juliet, TN
- Been thanked: 3 times
The AWD has the proper trans output shaft to attach to a bevel gear. I believe somewhere online here is how to change a AWD trans into a FWD both with ( removing center shaft) and without (removing bevel gear. In regards to the programming differences I am not aware of what the differences are. I know this worked for the pre 01 cars but do not know if the 01 and newer can be adapted without changing the output shaft in the trans.
Retired
-
JDS60R
- MVS Moderator
- Posts: 3532
- Joined: 21 February 2009
- Year and Model: 2007 S60R 2016 XC70
- Location: Mount Juliet, TN
- Been thanked: 3 times
Yes- trouble with trans as fluid seal is in the bevel gear or needs the collar to work. Looks like you need to spin a bevel gear with no center shaft to make it work.
please read this thread - should be very similar
https://www.matthewsvolvosite.com/forums ... =44682&f=9
please read this thread - should be very similar
https://www.matthewsvolvosite.com/forums ... =44682&f=9
Retired
-
prospectortom
- Posts: 56
- Joined: 15 December 2013
- Year and Model: 1999 S70
- Location: Tennessee
Ok. Sounds like its not going to work. Is there a cross reference where transmission from other models will work or does it have to come from an 012001 v70 FWD?
-
JDS60R
- MVS Moderator
- Posts: 3532
- Joined: 21 February 2009
- Year and Model: 2007 S60R 2016 XC70
- Location: Mount Juliet, TN
- Been thanked: 3 times
Can't help much with that. The hollander exchange that junkyards would know or a good trans shop would.
I thought I had heard that only an 01 will work(gearing electronics etc) in an 01 but all would fit (bolt up).
Try the search engine at car-parts.com and see what comes up. No guarantees but I thought that search engine was driven by the Hollander database.
I thought I had heard that only an 01 will work(gearing electronics etc) in an 01 but all would fit (bolt up).
Try the search engine at car-parts.com and see what comes up. No guarantees but I thought that search engine was driven by the Hollander database.
Retired
-
prospectortom
- Posts: 56
- Joined: 15 December 2013
- Year and Model: 1999 S70
- Location: Tennessee
Im going to get one from a junkyard tomorrow. Do i also need the computer or what else from that car?
-
JRL
- Posts: 9350
- Joined: 22 November 2005
- Year and Model: Several
- Location: 19333
- Been thanked: 16 times
01 and 02 are the only ones you can use
Mod note. Jim passed away in early 2022, his contributions to this forum are immortal, and he is missed. RIP
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
-
prospectortom
- Posts: 56
- Joined: 15 December 2013
- Year and Model: 1999 S70
- Location: Tennessee
I thank everyone for helping me out. 
This transmission is strange. Start and drive it about 1 mile. Stopped,put in reverse. No reverse. Then no drive.
This transmission is strange. Start and drive it about 1 mile. Stopped,put in reverse. No reverse. Then no drive.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 1717 Views
-
Last post by Lelica
-
- 1 Replies
- 2375 Views
-
Last post by RickHaleParker






