I slipped out and got two H11 bulbs from Advance and....
90 minutes later I still couldn't get the bulb out
I popped the rubber cap
Removed the ECU housing to better access, but still could only see the bulb with a mirror.
It didn't help that my owners manual says to release a bayonet spring which I don't see.
Over to the driver side, twist and it pops out in 5 seconds.
Back to passenger side.
Looking through the headlight lens, there are three tangs which lock the bulb in at 120 degree spacing so and the larger tang obviously indexes the bulb to socket. Looking closer , there is an extra piece of metal on the passenger side socket preventing the larger tang from releasing that isn't on the driver side.
I may have to take off the whole headlight assembly...can someone with Vida post that?
I'm away for a few days , anyone got experience here






