98 S70 evap purge valve issues

buffsstuff1 · Post by **buffsstuff1** » 04 Jul 2010, 03:04

If for some reason the evap purge line was broken somewhere between the canister and the evap purge valve, would it cause stumbling upon quick acceleration?

: 850-s70-vacuum-hose-routing.jpg (125.72 KiB) Viewed 1515 times

The car does fine at idle, does fine when the gas is slowly pressed, but when the gas is pressed quickly, it just bogs down. Any help would be greatly appreciated, thanks

Post by **abscate** » 08 Dec 2015, 18:12

It's much more likely the leak is in the elbow than the purge line

Post by **cn90** » 08 Dec 2015, 19:22

In general: no. EVAP hose, when broken, is not big enough to cause lean mixture. Simply b/c the diameter of these EVAP hoses are small.

Check around with a flashlight and mirror, some of these broken hoses are tough to find.