Login Register

91 740 Auto Wagon Initial Idle Probs

Help, Advice, Owners' Discussion and DIY Tutorials on all Volvo's "mid era" rear wheel drive Volvos.

1975 - 1993 240
1983 - 1992 740
1982 - 1991 760
1986 - 1991 780
1990 - 1998 940
1990 - 1998 960
1997 - 1998 V90/S90

Post Reply
goldmember
Posts: 14
Joined: 30 April 2007
Year and Model:
Location: Sydney Australia

91 740 Auto Wagon Initial Idle Probs

Post by goldmember »

G'day

I have a 1991 740 Auto Wagon which when first starts up, blows just a small puff of smoke (from the exhaust), the revs wobble then is relatively OK. It doesn't seam to idle very smoothly but gets better as it warms up, but is never perfect.

Fuel consumption is hardly affected (if at all). Recently the head was redone due to overheating on a hot day (temp fitting broke and I didn't realise, but thats another story).
Before the head was redone it was just serviced and it ran beatifully.

The mechanic seams to think it is either the Air Mass Flow Meter or one (or more) injectors could be just dripping a tiny bit of fuel in. To find out means exploratory surgery that could take hours. He has already done heaps of hours on it gratis as he is a friend and don't want to burden him with it.

Has anyone any idea what could be causing this and where I should look? I have already carefully cleaned the air mass meter with electronics solvent without any affect at all.

The only code showing is: 2-3-2:
Which according to some software I have says:
Lamda Adjustment - Check Intake manifold; Check Fuel Pressure

I don't know how to do these things, but I realise it could be something else.

Cheers

George
Gold Member is our Gold 91 740 Wagon

User avatar
billofdurham
MVS Moderator
Posts: 6507
Joined: 2 February 2006
Year and Model: 855, 1995
Location: Durham, England
Been thanked: 5 times

Post by billofdurham »

Welcome to Matthew's Volvo Site.

As you have come up with the code 2-3-2, check inlet manifold/fuel pressure, the first thing I would check would be for a leak at the inlet manifold. They can close up as the engine warms thus removing some of the symptoms.

As you have had the head done the inlet manifold would have been off and may not have been replaced properly.

Bill
Work was good - retirement is better.

1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.

waynej
Posts: 414
Joined: 18 April 2007
Year and Model: 1999 S70
Location: Sandpoint, Idaho

Post by waynej »

You can find the intake manifold leak with a spray can of Carb/Throttle body cleaner. Start eng cold and spray cleaner around all connections to manifold, especially where it mounts to head. When you hit the leak the idle will smooth out for a second or two.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post