To get there I will need to pull the wheel hub, unless there is some magic way of getting it on there without doing this
This is made more difficult by the wheel bearing being seated directly in the steering knuckle: I cant just take off a wheel bearing & hub assembly, but will have to pull the wheel hub from the wheel bearing.
To do that I have the following in mind:
- Pull the hub using something like this kit: https://www.amazon.co.uk/PIECE-SLIDE-HA ... 001RD7M28/
- When done, press the wheel hub back into the bearing using something like this kit: https://www.amazon.co.uk/gp/product/B00BVZN6RM/
My questions to you are:
- Have any of you tried this and have any good advice?
- Should I be worried that I will pull the bearing apart during the first step and just order a set of new front wheel bearings?
Cheers!