Wiring diagram request

Gst2ws6 · Post by **Gst2ws6** » 21 Jan 2018, 06:16

Good morning all,
I'm back in an s60r again!
I just picked up my second 2004 S60r m66 and I need to "fix" a few wiring issues.

I desperately need the wiring diagram for the driver and pass front seats along with the pin out for the harnesses the go to the seats.

I also, maybe more desperately need to know the srs wiring for the seats and what ohm resistance the system is too king for.

The reason for this is the previous owner removed the front seats and replaced them with seats from a tesla model s. I need to get these wired up and avoid the srs light until I can find a set of matching s60r seats in atacama.

On the off chance.... If anyone has tesla model s seats wiring diagrams lemme know lol

Post by **RickHaleParker** » 21 Jan 2018, 07:10

I need to get these wired up and avoid the srs light until I can find a set of matching s60r seats in atacama.

Take the SRS bulb out or put a piece of tape over it until you get some new seats.
Less work and a lower chance of messing up the SRS system and the Telsa seats.

Post by **abscate** » 21 Jan 2018, 07:59

There is a bunch of traffic on the web selling a 1.8 Ohm resistor as the load for Volvo but I don’t think it’s this easy.

Be careful testing load on the bag itself, a resistance check will send current into the air bag and I don’t know what the trigger current is.

I’ve never seen the SRS circuit function public , I suspect it isn’t out there