I tried watching a couple videos regarding the "Maintenance overdue" message reset process. No luck with either video. Does anyone know what the process is? I did try to search on this site and did not find the process.
Thanks in advance for help with this!
Maintenance overdue message reset - 2017 XC60
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Which one? You got three cars listed in your profile.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
So may don't do that I stopped looking there. 
1. Turn the ignition to position I.
2. Press and hold in the OK button on the left steering wheel stalk.
3. Continue to hold OK, turn the ignition switch to position II.
4. Wait for 10 seconds. Release the OK button when the information light starts to flash.
5. Turn the ignition off for 3 minutes and then start the engine to verify the indicator has been reset.
1. Turn the ignition to position I.
2. Press and hold in the OK button on the left steering wheel stalk.
3. Continue to hold OK, turn the ignition switch to position II.
4. Wait for 10 seconds. Release the OK button when the information light starts to flash.
5. Turn the ignition off for 3 minutes and then start the engine to verify the indicator has been reset.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
They must of changed it in 2107.
[youtube][/youtube]
[youtube][/youtube]
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
Sjunneman
- Posts: 1
- Joined: 8 January 2019
- Year and Model: 2017 Volvo XC60 D5
- Location: Sweden
- Been thanked: 1 time
You will find it in the manual, page 78-79. must be similar in eng version.
Att välja nyckelläge/nivå
• Nyckelläge 0 - Lås upp bilen – därmed är
bilens elsystem på nivå 0.
• Nyckelläge I - Med fjärrnyckeln helt intryckt i
startlåset15 – Tryck kort på START/STOP
ENGINE.
• Nyckelläge II - Med fjärrnyckeln helt intryckt
i startlåset15 – Gör ett långt16 tryck på
START/STOP ENGINE.
• Tillbaka till nyckelläge 0 - För att återgå till
nyckelläge 0 från läge II och I – Tryck kort på
START/STOP ENGINE.
Google Translate:
Selecting key mode / level
• Key position 0 - Unlock the car - thus is
the car's electrical system at level 0.
• Key position I - With the remote key fully depressed
start lock15 - Briefly press START / STOP
ENGINE.
• Key position II - With the remote key fully depressed
in the start lock15 - Press a long16 button
START / STOP ENGINE.
• Back to key mode 0 - To return to
key position 0 from position II and I - briefly press
START / STOP ENGINE.
Att välja nyckelläge/nivå
• Nyckelläge 0 - Lås upp bilen – därmed är
bilens elsystem på nivå 0.
• Nyckelläge I - Med fjärrnyckeln helt intryckt i
startlåset15 – Tryck kort på START/STOP
ENGINE.
• Nyckelläge II - Med fjärrnyckeln helt intryckt
i startlåset15 – Gör ett långt16 tryck på
START/STOP ENGINE.
• Tillbaka till nyckelläge 0 - För att återgå till
nyckelläge 0 från läge II och I – Tryck kort på
START/STOP ENGINE.
Google Translate:
Selecting key mode / level
• Key position 0 - Unlock the car - thus is
the car's electrical system at level 0.
• Key position I - With the remote key fully depressed
start lock15 - Briefly press START / STOP
ENGINE.
• Key position II - With the remote key fully depressed
in the start lock15 - Press a long16 button
START / STOP ENGINE.
• Back to key mode 0 - To return to
key position 0 from position II and I - briefly press
START / STOP ENGINE.
-
- Similar Topics
- Replies
- Views
- Last post