Hey! First post! Hoping to get some help. Any and all is appreciated.
I have what sounds like a belt squeak. Not at all the PCV squeak sound. I should mention the PCV squeak occurred in August and was replaced.
Squeak has primarily only occurred at idle. This morning when I started it it was making a humming when I revved it a bit. This is extremely unnerving for me.
Sometimes it does not squeak at all, but it always goes SQUEAAAAAAAAK when I turn off the car.
I took the car to firestone and they said everything is fine.
Any help? I have no issue replacing both SERP belts and tensioners but I’m terrified it might be the timing belt or water pump. If my car dies I am absolutely screwed.
Thanks!
S40 2.4i belt squeak
-
Katethes40
- Posts: 2
- Joined: 7 January 2019
- Year and Model: 2004.5 s40 2.4i
- Location: WI
- Has thanked: 1 time
- Been thanked: 1 time
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Go someplace else and get a second diagnostic. The big incorporated persons don't get the best mechanics because they woun't pay for the best.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
- Similar Topics
- Replies
- Views
- Last post