Login Register

S40 2.4i belt squeak

Post Reply
Katethes40
Posts: 2
Joined: 07 Jan 2019, 20:52
Year and Model: 2004.5 s40 2.4i
Location: WI
Has thanked: 1 time
Been thanked: 1 time

Post by Katethes40 »

Hey! First post! Hoping to get some help. Any and all is appreciated.

I have what sounds like a belt squeak. Not at all the PCV squeak sound. I should mention the PCV squeak occurred in August and was replaced.

Squeak has primarily only occurred at idle. This morning when I started it it was making a humming when I revved it a bit. This is extremely unnerving for me.

Sometimes it does not squeak at all, but it always goes SQUEAAAAAAAAK when I turn off the car.

I took the car to firestone and they said everything is fine.

Any help? I have no issue replacing both SERP belts and tensioners but I’m terrified it might be the timing belt or water pump. If my car dies I am absolutely screwed.

Thanks!

User avatar
RickHaleParker
Posts: 7209
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 980 times

Post by RickHaleParker »

Go someplace else and get a second diagnostic. The big incorporated persons don't get the best mechanics because they woun't pay for the best.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

Post Reply
  • Similar Topics
    Replies
    Views
    Last post