Bookmarking this one to make it a sticky/ reference document for stuck hoodsoragex wrote: ↑11 Oct 2019, 17:08 Uploaded a video showing a few ways to open a stuck hood that won't open www.youtube.com/watch?v=HwOv6AIqxHY
What did you do to your P2 Volvo today?
- abscate
- MVS Moderator
- Posts: 35273
- Joined: 17 February 2013
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1498 times
- Been thanked: 3810 times
Re: What did you do to your P2 Volvo today?
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
- TheMrFailz
- Posts: 61
- Joined: 12 September 2018
- Year and Model: 2002 V70 2.4T
- Location: NY
- Has thanked: 7 times
- Been thanked: 2 times
Delete all autotragic fragboxes.
Professional jerry-rigger.
- GlennG2759
- Posts: 248
- Joined: 30 June 2018
- Year and Model: 2006 V70 NA
- Location: Mid Hudson Valley N.Y.
- Has thanked: 112 times
- Been thanked: 17 times
Nice engine hoist !!
- tyguyc
- Posts: 54
- Joined: 13 November 2018
- Year and Model: 2004 xc70
- Location: SNH
- Has thanked: 1 time
I investigated the RH turn my TSC Light flashes under power.
Took off the tire and took off the ABS Sensor and rotated the wheel to find my
ABS Tone ring had snapped. So the part has been ordered and waiting for it
so that I can install it.
Took off the tire and took off the ABS Sensor and rotated the wheel to find my
ABS Tone ring had snapped. So the part has been ordered and waiting for it
so that I can install it.
-
StickyPocket
- Posts: 101
- Joined: 21 January 2019
- Year and Model: 2004 S60 2.5T AWD
- Location: Central NJ
- Has thanked: 42 times
- Been thanked: 6 times
Changed front right wheel bearing and hub assembly. Smooth again.
2004 S60 2.5T AWD
- TheMrFailz
- Posts: 61
- Joined: 12 September 2018
- Year and Model: 2002 V70 2.4T
- Location: NY
- Has thanked: 7 times
- Been thanked: 2 times
Now i've gotta go find t50 torx bits so I can take the torque converter off.
Edit: Also, the peg that aligns the starter with the transmission casing was so stuck in there that while I was rubber malleting it out I actually cracked the bit of the trans casing that holds it.
Professional jerry-rigger.
- TheMrFailz
- Posts: 61
- Joined: 12 September 2018
- Year and Model: 2002 V70 2.4T
- Location: NY
- Has thanked: 7 times
- Been thanked: 2 times
- GlennG2759
- Posts: 248
- Joined: 30 June 2018
- Year and Model: 2006 V70 NA
- Location: Mid Hudson Valley N.Y.
- Has thanked: 112 times
- Been thanked: 17 times
Replaced spring seats (Rein), mounts (Lemforder), & all strut hardware on '06 V70 103k. No more clunks & rattles. Struts were fine, thanks Pete & Abscate for advice.
-
- Similar Topics
- Replies
- Views
- Last post






