adrian121,
Your PCV system is clogged thus the glove inflating.
What is the mileage (miles or km) in your S60?
[S60 2.0T 2006] Oil leak near turbo Topic is solved
- RickHaleParker
- Posts: 7195
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 977 times
It is a fail. That is negative crankcase ventilation, it should be positive crankcase ventilation.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
- adrian121
- Posts: 8
- Joined: 09 May 2019, 03:31
- Year and Model: 2006 S60 2.0T
- Location: Cracow
- Has thanked: 2 times
It's been I while since last update.
There were an issue with PCV. I redone the whole system again and also changed PCV hoses near turbo - now it works like a charm.
Thank you @vtl and @abscate.
Unfortunately, oil leak near turbo is from head gasket. It was confirmed by two workshops. Leakage is not a big one and I need to choose between:
- leave it like it is and repair head gasket (and the engine) in the future
- replace head gasket
- change the engine
I am taking into consideration to replace head gasket by myself after winter.
Car is locked in the garage, for now.
There were an issue with PCV. I redone the whole system again and also changed PCV hoses near turbo - now it works like a charm.
Thank you @vtl and @abscate.
Unfortunately, oil leak near turbo is from head gasket. It was confirmed by two workshops. Leakage is not a big one and I need to choose between:
- leave it like it is and repair head gasket (and the engine) in the future
- replace head gasket
- change the engine
I am taking into consideration to replace head gasket by myself after winter.
Car is locked in the garage, for now.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 1101 Views
-
Last post by abscate
-
- 12 Replies
- 2263 Views
-
Last post by - Pete -
-
- 13 Replies
- 4769 Views
-
Last post by nutmegrose
-
- 25 Replies
- 4432 Views
-
Last post by xHeart
-
- 2 Replies
- 795 Views
-
Last post by jenkinskg






