Wiper/hood clearance on 960

[CSDentonTX]

Came here wondering about this. (Sorry for the blur, but I think you can see what I'm talking about)

2020-01-24 11-33-29-1m.JPG (55.8 KiB) Viewed 416 times

Among several small things when timing belt was replaced a while back at 75k was a new set of Rain-X wiper blades. I noticed recently that the blade arm actually touches the hood. It seems that the blade depth is so much and the clearance so close that the blade arm touches the hood, and while there is some observable wear on the blade arm, the hood doesn't seem to be too much affected. But still! They wipe well, still 2.5 years later--the car is garaged most of the time. I thought at first it was a problem with the Rain-X blades, but...

...here's the thread on the same problem with 850s viewtopic.php?t=34250&start=10

I am not sure I really understand the fix presented in that thread. Alex243's response is to just bend them. I'm having trouble picturing which way I need to bend.

This IPD video describes a related problem, but not exactly the problem I'm experiencing. My problem is with the touching the hood, not visibility. Looks to me like this could be solved by bending and twisting.

Anyone else have this problem on 960 and solved it?

[lummert]

My 1988 Volvo 760 has the same issue. Choice of wiper blades that fit better against the windshield will help. I really noticed the issue when raising the hood.

[CSDentonTX]

I removed the blades and it seems it still does it. I think there's very little clearance to begin with, and it may need to be bent back. I did notice that the nut seemed to be loose. I tightened them with a 13mm socket to see if that would help. Didn't seem to make that much difference.