2007 XC90 3.2 windshield washer fluid reservoir removal

nyc1836 · Post by **nyc1836** » 04 Mar 2020, 10:30

I have leaking windshield washer fluid reservoir on my 2007 XC90 3.2 .I want to replace it .Do I have to remove the bumper wheel well etc? I could not find any videos

any help appreciated
Thanks

Post by **RickHaleParker** » 04 Mar 2020, 13:02

Removal:

1. Detach the right side of the bumper cover.
2. Remove the screw for the fuel filler pipe.
3. Pull up the fuel filler pipe.
4. Disconnect the 3 hoses at the washer motors. Mark up the hoses.
5. Drain or plug the windshield washer reservoir.
6. Disconnect the connectors.
7. Remove the 3 screws.
8. Push the bumper cover to one side.
9. Pull down the windshield washer reservoir.

Install reverse the above order.