Login Register

CEM-8A12 V50 2009 model

Help, Advice, Owners' Discussion and DIY Tutorials devoted to the second generation C70, S40 and V50 Volvos -- awkwardly model year 2004 ½ onwards -- plus where to go for advice and discussion on Volvo's sporty C30 Coupe powered by Volvo's ubiquitous inline 5-cylinder power plant.
Post Reply
Savi
Posts: 6
Joined: 5 August 2020
Year and Model: 2010 V50
Location: Home

CEM-8A12 V50 2009 model

Post by Savi »

I have following error.
Any idea how to fix that?
All lights working expect "City light 194" which is led. Image
Passenger side city light is "dead" :?


Make:
Volvo
Code:
CEM-8A12
Definition:
Low Beam Left. Faulty Signal
Description:
The central electronic module (CEM) powers the left-hand low beam directly via an output. The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the power consumption for the output is too low. The diagnostic trouble code (DTC) can be diagnosed once the dipped beam has been on for a minute.
Cause:
Low beam defective or missing
Open-circuit in the signal cable to the right-hand low beam
Short-circuit to supply voltage in the signal cable. F.

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

Can you switch the left low beam off with the engine running?
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

Savi
Posts: 6
Joined: 5 August 2020
Year and Model: 2010 V50
Location: Home

Post by Savi »

Yes.

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

Resistance to the low beam has increased. Dirty connector, Bulb socket, Aged bulb or cooked wiring. Left low beam is the Green-Violet wire.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

Savi
Posts: 6
Joined: 5 August 2020
Year and Model: 2010 V50
Location: Home

Post by Savi »

Little update.

I erased errors via icarsoft and CEM-8A12 is gone. However problems is still there.
I cleaned all connector and bulb sockets.
Right Xenon bulb socket (rust removed).
Wires seems good but you never know.

Pros.

Registered plate lights both working now.
-Earlier left one was dead.

Cons.

Right City light is still dead.

-It seems left headlight don't make calibration when you start car.

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

That not a City light it is the parking light. Check the 194 bulb and trace voltage on the Orange-Blue wire.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

Savi
Posts: 6
Joined: 5 August 2020
Year and Model: 2010 V50
Location: Home

Post by Savi »

You are right. That is parking light 8)

I can't change that bulb :shock:

Here is reason why https://forums.swedespeed.com/showthrea ... ion-thread

NOTE (4): 2007+ Cars equipped with "active" bi-xenons may already have LED city lights. In this case, the bulb is not user replaceable (and is already the correct color). You can tell if this is the case because the city light will be a vertical bar close to the same color as the xenon bulb.

I don't really care those led-conversion but this is what i found.

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

Savi wrote: 08 Aug 2020, 01:18 I can't change that bulb :shock:
Open the round cap on the top and see what you find.
Check the open and closed voltage to the lamp.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

Savi
Posts: 6
Joined: 5 August 2020
Year and Model: 2010 V50
Location: Home

Post by Savi »

https://www.youtube.com/watch?v=ljl1T1zyM-E Volvo V50 2008 model.

And here is what i have under the round cap. https://freeimage.host/i/dE0KI2
I have 2009 model with bi-xenon.

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

Did you follow the Orange wire with a blue stripe? In the video it shows the parking light buried under.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post