Front Running lights.

Psy145 · Post by **Psy145** » 01 Jan 2021, 11:25

Are these glued in? From the looks of it they are but why? I hit a deer last night bent the grill in an inch or so and a little dent above where the running light sits. How hard are these to replace? Should I order new or hit the junkyard?

my98s70glt · Post by **my98s70glt** » 01 Jan 2021, 14:33

The corner lights have clips that just pop in/out. I have an oem passenger side headlight (removed from my ‘99v70R after upgrade to jewels) and corner (parts pile), just pay for shipping and they are yours.

: CB6328D8-C112-4A31-A54B-E2FF95033020.jpeg (62.64 KiB) Viewed 470 times

: 89F81956-DC42-413C-8134-3B44B6CBE96F.jpeg (195.34 KiB) Viewed 470 times

: 130FCCF4-34D4-4158-AB35-25CBD6DEE0C7.jpeg (205.35 KiB) Viewed 470 times

Post by **scot850** » 01 Jan 2021, 15:56

No they are not stuck in. It is just a bad design and the plastic guides and latch break off really easily, especially on aftermarket items.

There should be 2 guides on the inner side near the front that correspond with 2 hole on the fender. There is also a clip between the 2 guides.

Neil.