What do I need for 'drain and fill'?

[AlanS]

I'm gathering my supplies for a 'drain and fill' on my wife's 2013 S60. A friend gave me 5 qts of Mobil 3309. Is this the correct trans fluid to use? Is it fully compatible with whatever fluid remains in the gearbox? If so, then I guess I will have to pick up more. How much fluid usually exits on a typical drain?

I am also trying to get some washers for the drain plug. Seems that there are 'choices'. Metal, and then there is a thick O-ring offered. What do I need for a drain and fill?

[regent]

There is a nice video tutorial in this post and some additional helpful instructions:

viewtopic.php?f=26&t=94671&p=549490&hil ... on#p549490

[pgill]

Alan,

It is likely that you won't get quite this much out. But it will be close.

If you can't tell from the picture I was able to remove 3.8 Quarts



AISIN switched from the

T-IV type fluid (JWS 3309 (T-IV)

to the

WS type fluid JWS 3324 (WS)


And they did it around the time that you are asking about

Note: my research indicates that the fluids can be mixed but for me I prefer to stick with the original fluid.

For my Son's 2015 VW I used the WS fluid and for my other Son's 2010 Volvo I used the T-IV type


Parts to get

30713219 Auto Trans T40 Bolt

1233068 O-ring for T40 Bolt

30713220 Washer

https://www.fcpeuro.com/products/volvo- ... 0-30713219
https://www.fcpeuro.com/products/volvo- ... 90-1233068
https://www.fcpeuro.com/products/volvo- ... 0-30713220




Good Luck

Paul

PS Looking at IPD it looks like you need the WS not the T-IV

https://www.ipdusa.com/products/10543/A ... 540-122082

https://www.ipdusa.com/products/10578/A ... 774-123941