Login Register

Vida CEM swapping

Post Reply
oscilloscope
Posts: 285
Joined: 20 May 2022, 16:12
Year and Model: 2005
Location: uk
Has thanked: 27 times
Been thanked: 11 times

Post by oscilloscope »

T5Luke wrote: 01 Aug 2022, 16:29 I have both and on both of them the same code works. So have fun with it...
Ok took the plunge and bought it.

alevol
Posts: 31
Joined: 04 Aug 2021, 03:38
Year and Model: 2005 S60
Location: Finland
Has thanked: 6 times
Been thanked: 3 times

Post by alevol »

4.1 works fine.

oscilloscope
Posts: 285
Joined: 20 May 2022, 16:12
Year and Model: 2005
Location: uk
Has thanked: 27 times
Been thanked: 11 times

Post by oscilloscope »

alevol wrote: 02 Aug 2022, 02:28 4.1 works fine.
Thanks

oscilloscope
Posts: 285
Joined: 20 May 2022, 16:12
Year and Model: 2005
Location: uk
Has thanked: 27 times
Been thanked: 11 times

Post by oscilloscope »

We have lift off. Its arrived :D

When My son goes to bed ill have a good look at it.

jaywats
Posts: 11
Joined: 21 Jul 2022, 12:02
Year and Model: 05/06 s60r
Location: USA
Has thanked: 14 times
Been thanked: 1 time

Post by jaywats »

ZRimaZ wrote: 12 Jun 2022, 01:12
vtl wrote: 11 Jun 2022, 16:49 It seems my repaired alarm siren is again leaking and again draining the main battery. I want to throw it away, the car is never locked anyways. Don't what to see the immobilizer warning message on every start, though. What are my options? Is it a bit toggle in CEM's car config?

I may have finally put the whole pin cracking project at use ;)
You have to remove alarm in cem config and after - disconnect siren. If you have cem flash, send it to me, i'll remove alarm from config ( in case if you do not know, how to do it ;) )
Hey I'm stuck on the same thing too, it's next on the list. can you share what needs to be changed on CEM-H 30765148?thanks!
P2 - 06 S60 2.5 || 05 S60 2.5 || 02 S60 2.3

ZRimaZ
Posts: 77
Joined: 08 Mar 2009, 12:26
Year and Model: XC60 MY2016 3.0 T6
Location: Lithuania, Kaunas
Has thanked: 23 times
Been thanked: 13 times

Post by ZRimaZ »

Send your flash to me, I'll do it
Have a nice day,

ZRimaZ

oscilloscope
Posts: 285
Joined: 20 May 2022, 16:12
Year and Model: 2005
Location: uk
Has thanked: 27 times
Been thanked: 11 times

Post by oscilloscope »

folks , so I'm trying to locate the vin within this CEM and i can't find it at the typical location :?:
VOLVO CEM_0L01Y_EEPROM.7z
(902 Bytes) Downloaded 108 times

wormland
Posts: 5
Joined: 11 Aug 2020, 05:28
Year and Model: 2007 XC90
Location: Sweden
Has thanked: 13 times
Been thanked: 1 time

Post by wormland »

VIN is located in flash, not eeprom.

oscilloscope
Posts: 285
Joined: 20 May 2022, 16:12
Year and Model: 2005
Location: uk
Has thanked: 27 times
Been thanked: 11 times

Post by oscilloscope »

wormland wrote: 16 Aug 2022, 22:13 VIN is located in flash, not eeprom.
opps wrong one then ha , thanks :mrgreen: is that where the abs code is stored too ?

ZRimaZ
Posts: 77
Joined: 08 Mar 2009, 12:26
Year and Model: XC60 MY2016 3.0 T6
Location: Lithuania, Kaunas
Has thanked: 23 times
Been thanked: 13 times

Post by ZRimaZ »

You mean ABS (BCM) serial? No. BCM serial is in ECM eeprom as part of immo system
Have a nice day,

ZRimaZ

Post Reply
  • Similar Topics
    Replies
    Views
    Last post