-98 V90 left handbrake cable replacement

jukkah · Post by **jukkah** » 09 Aug 2008, 11:51

How on earth is it possible to replace left handbrake cable ? The cable goes through the subframe and I can

Post by **billofdurham** » 09 Aug 2008, 12:41

Welcome to Matthew's Volvo Site.

According to VADIS you do not have to remove the subframe. However, instructions are given for two types of axle - live or multi-link. Which is yours?

Bill.

jukkah · Post by **jukkah** » 09 Aug 2008, 14:31

billofdurham wrote:Welcome to Matthew's Volvo Site.

According to VADIS you do not have to remove the subframe. However, instructions are given for two types of axle - live or multi-link. Which is yours?

Bill.

I think that V90 always has multilink and so has mine. By the way I found the solution. There isn

Post by **billofdurham** » 09 Aug 2008, 15:27

Good to know you have it fixed. Thank you for the update.

VADIS shows a replacement cable for a live rear axle but I didn't think they had such a thing, but it is best to check.

Don't hesitate to post again if you need to.

Bill.

jukkah · Post by **jukkah** » 10 Aug 2008, 01:09

billofdurham wrote:Good to know you have it fixed. Thank you for the update.

VADIS shows a replacement cable for a live rear axle but I didn't think they had such a thing, but it is best to check.

Don't hesitate to post again if you need to.

Bill.

Yeah; I have the VADIS pictures about -97 960 Volvo multilink but the construction is different in V90. In V90 the cables go through the subframe and in 960 they don