2007 XC70 Camshaft Specs

[TempXCGuy]

Hi guys!

I picked up a low mileage xc70 recently and am working my way through a series of unfortunate repairs. One of which resulted in some scarring on a few of the cam bearings and aluminum transfer to both cams. Not wanting to take any chances, I picked up a used motor that was supposed to be in good shape. However, I’m finding evidence of very little maintenance, namely lack of oil changes, and possibly too much clearance in a couple cam bearings.

Ive been looking around but can’t find a spec on the diameter for the cam bearings. Do “you” know where I can get this number?

Thanks in advance!

[jonesg]

alum transfer on steel can be removed with muriatic acid.
but where did the alum come from.?