1996 Volvo 850 GLT N/A - Radiator clips
-
jragone
- Posts: 8
- Joined: 6 October 2024
- Year and Model: 1996 850 GLT
- Location: Detroit, MI
- Has thanked: 6 times
- Been thanked: 2 times
1996 Volvo 850 GLT N/A - Radiator clips
Does anyone have the part number for the radiator clips into which the bolts that hold the radiator to the condenser mount? There are four that clip on the sides and two on the top. Mine are pretty far gone with rust, so I’d like to replace them.
Last edited by jragone on 25 Jul 2025, 08:16, edited 1 time in total.
-
scot850
- Posts: 14875
- Joined: 5 April 2010
- Year and Model: 2000 V70 R
- Location: Calgary, Alberta, Canada
- Has thanked: 1839 times
- Been thanked: 1709 times
I believe it is #38 the spring nut you are looking for on this drawing. Even expanding the drawing it is hard to see on the left hand of the radiator as seen in the picture.
https://www.volvocarstorontoparts.ca/a/ ... 39909.html
https://www.volvocarstorontoparts.ca/p/ ... 49921.html
Multiple part numbers but this looks like the most recent #: 949921
Neil.
https://www.volvocarstorontoparts.ca/a/ ... 39909.html
https://www.volvocarstorontoparts.ca/p/ ... 49921.html
Multiple part numbers but this looks like the most recent #: 949921
Neil.
2006 V70 2.5T AWD Polestar tune
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
- abscate
- MVS Moderator
- Posts: 35278
- Joined: 17 February 2013
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1500 times
- Been thanked: 3812 times
I replace those with M6 hardware in cheap stainless which makes removal a lot less painful.
Zip tie two opposite corners to hold the sand which together, install bolts into other corners, then cut ties and do the first corners.
Zip tie two opposite corners to hold the sand which together, install bolts into other corners, then cut ties and do the first corners.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
-
- Similar Topics
- Replies
- Views
- Last post






