What did you do to your Volvo today? Topic is solved

[Sveedy]

I thought it looked like frogs legs.............

Neil.

[MoVolvos]

Also cleaned the original oil trap by soaking it in industrial degreaser. It’s ready for a second round around the block.

.
Did you do a glove test before the soaking? If so let us know the after. Always wondered if degreasing could return the part back to service. Currently our 07 S60 2.5T is neutral in terms of the glove test. No suction nor inflating of the glove.
.

[rolsen11]

New Nissens heater core and recirc flap actuator arm on order from FCP, along with some interior clips and crush washers to get that free shipping. I'm excited to finally have some good heat, a couple days ago I had to drive to work in -20F temperatures, my fingers felt like popsicles the entire drive. Never again... I hope

[Chieber]

Also cleaned the original oil trap by soaking it in industrial degreaser. It’s ready for a second round around the block.

.
Did you do a glove test before the soaking? If so let us know the after. Always wondered if degreasing could return the part back to service. Currently our 07 S60 2.5T is neutral in terms of the glove test. No suction nor inflating of the glove.
.

This is the original one on the car that I took off when I did the pcv job a couple months back.
I replaced it with an aftermarket one and kept the old apart.


But it seems there’s not much to the oil trap. This picture from cn90 shows the inside of it.

IMG_5103.jpeg (108.84 KiB) Viewed 528 times

BTW. Anyone knows what this plastic bolt does? It’s on the accelerator pedal and doesn’t look like it’s connected to anything.

[Chieber]

I used a heat gun to bend the frog legs apart. Now it does look like proper antlers.

[abscate]

Got the s70 out and solved the no heat problem by adding coolant. 3 liters down.

[scot850]

Now that looks like a moose! Well done and the moose will thank you!!

Neil.

[454cid]

Got the s70 out and solved the no heat problem by adding coolant. 3 liters down.

That's a lot! Any idea where it's going?

[abscate]

Got the s70 out and solved the no heat problem by adding coolant. 3 liters down.

That's a lot! Any idea where it's going?

Not yet. There is a seep at the right side radiator Metal-to-plastic tank junction. I hope that is it.

If not, both seats will have to come out to drain coolant out of the body pan...

[Sveedy]

Found a couple of good parts out in the junkyard.
'99 -'00 turbo passenger side axle, and a V.V.T hub still on the cam.
I'll toss the cam.