2006 XC90 Steering Coupler Topic is solved

cuhfs2 · Post by **cuhfs2** » 07 Jul 2025, 11:29

Hello,

Trying to replace the lower coupler (under the rubber boot) on a 2006 XC90 (see part #7 on schematic below. I was expecting to see pinch bolt under the dash to release the column shaft so I can thereafter remove the coupler off the shaft. Any help identifying how to R&R lower .steering coupler off the shaft is appreciated.

Post by **ggleavitt** » 07 Jul 2025, 19:46

Best I can offer is cut/paste from VIDA, let me know if you need more.

Steering Shaft R&R XC90 2006.pdf: (944.27 KiB) Downloaded 100 times

cuhfs2 · Post by **cuhfs2** » 08 Jul 2025, 11:08

VIDA PIC.pdf: (61.31 KiB) Downloaded 82 times

No luck locating the bolt connection shown in vida, I think It does not exist on 2006 XC90 Attached is the connection that was unlocatable

also shown at the 2.26 minute mark of video - for bolt that is not findable on my 2006 XC90

Post by **cuhfs** » 05 Feb 2026, 19:57

Closing this thread. Steering was stiff. Figured out it was the steering coupler. I needed dealer to do the work as I could not do it. Part and labor was about $700. Money well spent for a job i could not do. .