Help diagnosing bad engine sound *solved* Topic is solved

[vtl]

And remove the passenger axle and angle gear to get access to this port.

[seggs]

Thanks so much. I have a new project on the list!

[seggs]

vtl, the vehicle is FWD, so no angle gear. Can I access the port without axle removal?

[vtl]

vtl, the vehicle is FWD, so no angle gear. Can I access the port without axle removal?

I don't remember. Crawl under and check yourself? There's a small square window.

1.jpg (117.89 KiB) Viewed 858 times

[seggs]

Yeah, I would if it were available to me. Just trying to be ready next time my daughter brings it home.

[seggs]

Finally was able to get under the car, and the good news is, on FWD cars, the bolts are easily accessible….an open gap right next to the axle.
The bad news is none were loose, so still on the hunt for the evasive, intermittent rattle I’ve been chasing.

[greffel]

Did not find a link to the engine sound from you
My sound was really similar to rood knock

Off with the oil pan and check for worn bearings

[vtl]

High-pitched rattle is often a worn VVT hub or sticky VVT solenoid. Use stethoscope to locate the noise, and also record the video as already asked. Low-pitch rattle is something related to crankshaft.