Where to Source Miscellaneous V70 Parts

SHS850 · Post by **SHS850** » 10 Feb 2009, 16:31

I need to source a few items for a P2 V70:

1. Plastic trim cover (graphite color) on rear bumper (passenger side) that covers the tow bolt opening.
2. Passenger side front air vent.
3. Cup holder assembly inside rear armrest (mine's cracked).

Is there a DIY to remove and replace the specific air vent? I know of a salvage yard that might have one nearby for an S60. I guess I should remove the vent on my car first to see how it comes off and which tools I need to bring with me.

Can all the above parts be sourced from an S60/S80 vehicle?

Thanks,
Steven.

tomtoth · Post by **tomtoth** » 14 Feb 2009, 08:00

Vents are Interchangeable, best to have 2 people to pull them out (without breaking) pry gently around and watch the 4 tabs inside the vent.. flat head/tooth picks inserted to keep tabs up to pull vent out easier.

Cup Holder: V70 is different then S60, S60 has a flip assembly, that is kinda pain to change out, but NOT interchangeable. Not sure about S80.

Tom

Post by **JRL** » 14 Feb 2009, 17:56

S60 parts will be the same.
You can try www.erievovo.com for used parts