Login Register

240 Steering noise

Post Reply
markvt
Posts: 89
Joined: 14 Sep 2006, 21:20
Year and Model:
Location: Vermont-Florida

Post by markvt »

Bill, I wrote before concerning a bumpy feeling in the steering wheel when I turned it. Well, it went away. The problem only developed after I had disconnected the tie rod end from the steering arm. My theory is: the car was on a lift for about a week with one tie rod disconnected at the steering arm and hanging. Air that had been in the cover of the tie rod for years was forced out by oil flowing from the rack into the cover. The air worked itself into the piping to the the pump. With air in the lines I was getting intermittent pressure from the pump. When the air finally rose to the top of the resevior, the problem went away.
Any other thoughts on what might have been causing it?
Mark
1992 240 GL

1966 Sunbeam Tiger

User avatar
billofdurham
MVS Moderator
Posts: 6507
Joined: 02 Feb 2006, 15:31
Year and Model: 855, 1995
Location: Durham, England
Been thanked: 5 times

Post by billofdurham »

That sounds like a very feasible explanation and one I hadn't considered. In effect using the car has bled the steering.

Bill.
Work was good - retirement is better.

1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post