Volvo v70 2001 stall after warm

bobsnow100 · Post by **bobsnow100** » 01 Jul 2009, 08:52

If you "google" that code, it appears that this code comes up when the battery is disconnected.

Bohmer Robert · Post by **Bohmer Robert** » 01 Jul 2009, 10:52

Well there is a new code P0512 Starter Request circuit?

Bohmer Robert · Post by **Bohmer Robert** » 01 Jul 2009, 19:05

I was messing up with the Camshaft Position Sensor and 2 more codes came up one off them P0452 - Evaporative Emission Control System Pressure Sensor Low any idea, could be this code related to the stalling problem?

Bohmer Robert · Post by **Bohmer Robert** » 02 Jul 2009, 11:52

Ok All fixed!! well at least so far it looks like! I found computer under black box on left side below coolant tank. removed cover and started to move the computers. I think it was a bad contact in one of those two and that's why P0603 was coming up all the time. So far check engine lights gone, scanner didn't find any codes. But the service light on after start the engine. After 2 -3 min. off until restart the engine again. than comes up again for 2-3 min.
thaks all for replaying
Robert Bohmer

Post by **vegasjetskier** » 02 Jul 2009, 12:11

Bohmer Robert wrote:But the service light on after start the engine. After 2 -3 min. off until restart the engine again. than comes up again for 2-3 min.

That's telling you that you need to change the oil. You should be able to reset that yourself with one of the methods in the Repair Database.

Volvo v70 2001 stall after warm

Re: Volvo v70 2001 stall after warm