Having removed the screws around the rim of the glove box in my '93 850 I expected it to pull out (after releasing the stop arms) but it's hanging up on something I can't see, apparently near the top. Any suggestions? Is there any danger of triggering the airbag working on a damper motor in that area?
JB
reluctant glove box, airbag hazard?
-
GrumpyOldMan
- Posts: 40
- Joined: 13 December 2008
- Year and Model:
- Location: Awestralia
- Been thanked: 1 time
Not sticking on the lid catch ?
Bit that's screwed to the dash frame that is..
And no, no issues for the air bag.
The airbag wiring is normaly in a yellow/orange loom/tube.
Can't miss it.
Here, have a pic, note the missing dash pad and airbag.
Airbag wire is green connector and orange tube......
Bit that's screwed to the dash frame that is..
And no, no issues for the air bag.
The airbag wiring is normaly in a yellow/orange loom/tube.
Can't miss it.
Here, have a pic, note the missing dash pad and airbag.
Airbag wire is green connector and orange tube......
- Attachments
-
- hole.jpg (91.06 KiB) Viewed 919 times
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 4073 Views
-
Last post by aewoodhouse
-
- 9 Replies
- 3205 Views
-
Last post by crlande