I'm still procrastinating on investigating this issue, but in a moment of distraction, looking for some verification of my theory of what's wrong, and a way to assemble without damaging the seal rings, I came across a really good rebuild manual. I'll paste the link here, hopefully it will help somebody...
http://akpphelp.ru/images/contents/file ... 2051SN.pdf
I'm still looking for the best way to ensure the 4-5 CLUTCH HOUSING FLUID SEALING RINGS don't get damaged on assembly and how to confirm that the bush they are supposed to contact is in the correct position
XC70 Transmission AW55-50SN No Drive - Problem found... C1 frictions burned and Drum cracked
-
precopster
- Posts: 7543
- Joined: 21 August 2010
- Year and Model: Lots
- Location: Melbourne Australia
- Has thanked: 8 times
- Been thanked: 128 times
I had the same issue with a 2001 XC70. I replaced drum with a good used one and as a just reward 2nd gear was missing. I was pretty fed up and replaced the transmission with a good used one.
Current cars VW Transporter 2.5TDI, 2010 XC90 D5 R Design
-
- Similar Topics
- Replies
- Views
- Last post






