Login Register

Vida CEM swapping

Post Reply
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

Do you have VBF CONVERT ver.3.7.0 and Volvo VBF tool thank you
[/quote]

Hello. Unfortunately, I don't. I am looking for myself but no one wants to share
Top
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

Only old if it helps?
Attachments
VBF Tool 2.2.0.7z
(3.36 MiB) Downloaded 401 times
Top
User avatar
RickHaleParker  
Posts: 7196
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 978 times

Post by RickHaleParker »

charlie13 wrote: 16 Apr 2022, 14:31 Only old if it helps?
Could use the older v1.X and newer v3.X

White papers on the VBF formats would be nice.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
Top
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

I want to connect to table P3. The can contacts are in the blue plug. I am looking for power and minus. Will anyone help? May be priv
Top
vtl
Posts: 4928
Joined: 16 Aug 2012, 13:35
Year and Model: 2005 XC70
Location: Boston
Has thanked: 129 times
Been thanked: 686 times

Post by vtl »

charlie13 wrote: 20 Apr 2022, 09:48 I want to connect to table P3. The can contacts are in the blue plug. I am looking for power and minus. Will anyone help? May be priv
This is what I had.
Attachments
1.png
1.png (1.21 MiB) Viewed 1148 times
2.png
2.png (1.21 MiB) Viewed 1148 times
Top
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

vtl wrote: 20 Apr 2022, 12:00
charlie13 wrote: 20 Apr 2022, 09:48 I want to connect to table P3. The can contacts are in the blue plug. I am looking for power and minus. Will anyone help? May be priv
This is what I had.
Thank you. See my attachment. I have a CEM M32C + 95320. Your description is R5F64524 / R5F64525
Attachments
ford bcm wiring diagrams.pdf
(556.85 KiB) Downloaded 481 times
cem P3.jpg
Top
alevol
Posts: 31
Joined: 04 Aug 2021, 03:38
Year and Model: 2005 S60
Location: Finland
Has thanked: 6 times
Been thanked: 3 times

Post by alevol »

vtl wrote: 13 Apr 2022, 14:46 Let us know how it goes.
Cracking about 2h now.
SEED 90 0f f5, PIN 00 01 11 45 47, KEY 42 1e 44, 235 pins/s

If there were ways to accelerate the speed... SMOK.pl promises 0...10h to crack. Some tools claims 4-6h. They must be using different approach. Or better hardware maybe?
Top
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

alevol wrote: 21 Apr 2022, 05:58
vtl wrote: 13 Apr 2022, 14:46 Let us know how it goes.
Cracking about 2h now.
SEED 90 0f f5, PIN 00 01 11 45 47, KEY 42 1e 44, 235 pins/s

If there were ways to accelerate the speed... SMOK.pl promises 0...10h to crack. Some tools claims 4-6h. They must be using different approach. Or better hardware maybe?
Still counts. I have a UHDS and an I / 0 terminal. UHDS counts slowly, I / 0 terminal does all CEM P1, P2, P3, SPA. That's why I / 0 is the better tool for me.
Top
wormland
Posts: 5
Joined: 11 Aug 2020, 05:28
Year and Model: 2007 XC90
Location: Sweden
Has thanked: 13 times
Been thanked: 1 time

Post by wormland »

alevol wrote: 21 Apr 2022, 05:58
vtl wrote: 13 Apr 2022, 14:46 Let us know how it goes.
Cracking about 2h now.
SEED 90 0f f5, PIN 00 01 11 45 47, KEY 42 1e 44, 235 pins/s

If there were ways to accelerate the speed... SMOK.pl promises 0...10h to crack. Some tools claims 4-6h. They must be using different approach. Or better hardware maybe?
Speed depends on which P3 CEM they are referring to. 2008-2010 is slowest. And then 2010-2014. Fastest is 2014-2017.
Top
gooroo
Posts: 9
Joined: 28 Jul 2021, 04:40
Year and Model: XC70 2005
Location: Portsmouth

Post by gooroo »

No idea if this is what you wanted....?

Regards, Simon
Attachments
VBF-convert-to-BIN.zip
(820.78 KiB) Downloaded 302 times
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “XC90 1st gen 2003-2014”