1988 740 turbo 2.3 wagon need help

tina pangborn · Post by **tina pangborn** » 10 Aug 2009, 08:05

My problem is finding out were some parts are located. My car keep stalling out (no sounds just died) any finaly quit running. I have no spark but have replaced the spark plugs rotor and rotor cap and the ignition module, its sounds like mt fuel pumps are working I do smell gas also, that is why I'm thinking the problem is electrical, please help!

Do I have a ecu self diagnostics system? if so were is it located?
Do I have a Halls sensor? I need to know where this is located. Basicly I would like to know if there is anywere on the internet that I can go to see a diagram of my engine mainly electrical Any help would be greatly appreciated thank you

FCPEURO · Post by **FCPEURO** » 10 Aug 2009, 08:24

It sounds like your RPM sensor went bad. This is why you are not getting any spark. Very common issue on these cars.

tina pangborn · Post by **tina pangborn** » 10 Aug 2009, 10:38

Do you know were the rpm sensor is an can I replace it myself?