I am in the process of changing my oil trap.
I am having a real B----- figuring out where the disconnect for the fuel is.
The fuel line (no play) has a pressure sensor which is attached to the rail. I think I have to remove the metal cover over the rail in order to get at to the fuel line disconnect.-
- removed the 3 25 torx screws on the back of the cover
- 2 bolts attaching to the manifold.
- screw for the fuel pressure release.
After all this the metal cover still doesn't move.
Pleese could really use help on this.
Madness
v70 2003 removing injector rail cover
-
volvomadness
- Posts: 143
- Joined: 2 September 2009
- Year and Model: v70 2003
- Location: new york
- Been thanked: 9 times
-
JRL
- Posts: 9350
- Joined: 22 November 2005
- Year and Model: Several
- Location: 19333
- Been thanked: 16 times
PULL
Mod note. Jim passed away in early 2022, his contributions to this forum are immortal, and he is missed. RIP
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
-
- Similar Topics
- Replies
- Views
- Last post