are they engine mountings volvo s60

adam180 · Post by **adam180** » 21 Sep 2009, 10:37

hello everyone
i have had a lot of problems with engine mountings on my volvo S60 TS (2001), the ttouble is its sleeping policeman city where i live.
First a bracket snapped that held a ball shaped mounting with a metal strap (this is the front of the car, in front of the radiator), the hardest bit was getting the bolt that sheared off out.
Now i still get a bit of noise and i was wonder if any of you experts could take the time to have a quick blimp at the picture i took of the area in question.(they are on each side between the front of the wheel and the front of the car)
http://i575.photobucket.com/albums/ss19 ... lvoS60.jpg

http://i575.photobucket.com/albums/ss19 ... lvoS60.jpg

It looks like its all over to one side, on this one, and the big washer could be rubbing maybe?
thanks
Adam

Post by **billofdurham** » 21 Sep 2009, 15:42

Welcome to Matthew's Volvo Site.

Looking at the pictures and from your description that these two parts are each side I would say that they are the sub-frame bushes.

S60 Engine mounts2.pdf: (598.38 KiB) Downloaded 174 times

Part #26 is a one off at the rear left of the sub-frame. There are 3 of part #25 (number hidden by 64). One at the right rear and the other two in the holes at the right and left front.

The engine mountings are part #40, lower front; #23, lower rear; #15, lower right and #9, upper anchorage.

Bill.

adam180 · Post by **adam180** » 27 Sep 2009, 03:58

Hello Bill
Sorry for not getting back to you sooner, i only get on this weekends.
I am having a bit of trouble getting my barings on this exploded diagram, if the left is the front (of the car) & right the back, i think i need the parts in the smaller circle, it is 64 and it looks like 25?.
Im sure i fitted part 41 the other week, making left the front.
Have you got part numbers please Bill.
cheers Adam