climate control panel

nifty850 · Post by **nifty850** » 03 Nov 2009, 04:44

hello everyone, am new to site and need advice.
97' 850 base
140k
u.s.
left knob/driver temp. adjust does not stop at low and high marks. encounters a slight bump but goes all the way around. it is not the knob itself. it is inside the white plastic housing. my question is can this be repaired or do i need to replace this module. thanks

FCPEURO · Post by **FCPEURO** » 03 Nov 2009, 07:40

Just go on eBay and find yourself a new control unit. Can't be to much money used on eBay.

nifty850 · Post by **nifty850** » 03 Nov 2009, 15:25

Thank FPL, thought this is was the verdict would be, but wanted to ask before spending $70.

Post by **Ozark Lee** » 03 Nov 2009, 22:05

Be prepared for frustration. The MCC panel is a real bear to replace.

Patience Grasshopper and you will get there. I actually repaired mine but it wasn't pretty.

...Lee