One my T5 I stuffed butyl tape down between the glass and dash with an ice pop stick and stopped 99% of squeaks , cosmetically it’s about a 6/10. It would look better if I put another piece over it to dress it up. On Evita , a 1999 S70 , Abby and I took the dash out, about 75 minutes, and then reglu...

Abby and I pulled the dash from Evita and out the tape where it belongs, on the underside. This looks completely clean from the cabin and also works totally to elinate squeaks. I used clear liquid two part epoxy by JB Weld to rebuild mounts and strengthen cracks

Hello ladies and gentlemen. I'm starting a money pool / supporting program to get free Volvo parts to those in financial distress. Contact Matthew if you need parts and are in financial distress. FDPP Status Here is the Here is the FDPP Status Thread . It has the latest on the overall lifecycle of a...

I’m inspecting mine really closely, I’ve heard this can spread to the rocker panels

And I see your other thread, which answers my previous query above.....

I might have that on my parts 1998. I’ll be in UK in SEP so I could post it locally

I’ll also be in the Black Country visiting family if that’s not too far

Basically did what that guy does, except I drilled 4 holes to make it easier

What I read did not sound 100% correct so pulled out the laptop with Vida to check. Cookeh got it mostly right but this may help: Top Torque mount install (1).jpg Top Torque mount install (2).jpg Hopefully this does not get us in trouble!! It has been a long time, but I was sure that the dealer fore...

Alright, admins and moderators. This topic is solved, at least for me. Flag it as solved, i dont know how... The solution is simple: as soon as you remove the surface plastic from the window crank, there you got a metallic kind of plug basis. Pull it with a flat screw driver from top or bottom. Try ...

A slam panel would also be known as a core support, as in supports the radiator core., at least in the traditional vernacular.