They always make it look easy in the videos, its not real world, they already removed it and put it back before turning on the camera. In reality it takes a lot of fighting, band aids and cursing. You disconnected the battery right? if not, do so. otherwise, lie on your back with your head on the br...

maybe the elec contacts on the computer, ecm, in the engine bay box.
Clean and reseating it seems to cure many ailments.
Oragex has a video showing how to release the ecm/ecu without the special tool.

E Showell wrote: ↑19 Jun 2020, 15:55

Idle overspeed control?

A form of limp mode.
If signal from sensor on the foot pedal doesn't match the throttle body its a safety issue.

For $100 you can get vida loaded and ready to run on SSD USB drive, run it on any computer you want . It runs win 10 but you don't need win 10 on the host computer, its all self contained on the SSD. Just change boot order in the bios to put SSD first and it will boot the SSD instead of the host mac...

The Over-the-Engine charge pipe came off in November 2019 to do the coils/plugs, but only on the radiator end. Otherwise, was manipulated out of the way on the firewall end, and with very little movement on that end. I would think if I were to have had a problem there, it would have appeared much s...

Hi Kids, me again! Thoughts on this one? Looks clean... interesting write up too. They really listened to Google about "How to sell a car online." Thank you in advance. Beth https://atlanta.craigslist.org/atl/cto/d/atlanta-take-this-2001-volvo-v70-t5/7141183646.html Just buy it.

two questions I'd ask, the mfger of the CV axles and how many keys does it come with.
Then offer 2500.... no matter what the answers are.

I got srs when I unplugged the rear seat harness, bought a $240 autel to clear code, then another $300 for vida setup on a laptop.
$550 later.... I now unhook the battery first.

IdahoBob wrote: ↑02 Dec 2017, 17:36 I just flip it over and re-use it. They last many, many uses.

copper can be annealed with a propane torch.

Thanks Darryl. This is much better than what I tried . :lol: I made your account MVS Contributor for sharing this. Let me know if you want the contributor avatar. home ovens don't get hot enough for that press fit. when they fit steel tires to cast iron steam loco wheels they get them very hot with...