Dudde wrote: ↑01 Mar 2024, 14:16

hampus10699 wrote: ↑01 Mar 2024, 14:11 Hi all.
Does anyone know where I can get T5Lukes cem cracking software?

Page 223

its gone...
here you can get it again:

30 days valid

https://easyupload.io/15802z

Hi everyone 4 months ago I started a project on Gihub named "Open Hardware Electronics for the Volvo P2 platform".The main objective is to design and prototype OEM hardware electronics capable of the same operation and functionality for all Volvo's with the common chassis P2, period 1998 t...

page 3 shows exactly where to drill the case.

viewtopic.php?t=98458&hilit=transmissio ... r&start=20

In no particular order:

- air bubble trapped in the heat core
- heat core is clogged
- HVAC air distributor malfunctions (common at this age)

What do you see? Something like this?

Hi, I have made my own SBL in C for the P1 CEM ref 31327215, it is working well, I'm able to read the complete flash including eeprom, erase sectors and write to it. I tried it on an other CEM (still P1) 30765015 but it seems that asking the checksum using the CAN protocol doesn't work, on the 31327...

Hello, our xc70 is having a transmission issue. The other day when shifted into drive or reverse it wasn't engaging, was in neutral. Let the car sit for a while. (It was a very hot day) Once the car cooled down. Shifts normally. Checked the transmission fluid and it was very dark. We performed a fl...

Someone said voltage should be like 11 to 14 volts i believe it was but i only get 2.7v.... thats with key on engine off pin 6 of the etm connector that comes from the car side... what could be causing this?

I was able to remove the pan by jacking the engine up, as describe in that youtube comment, on a 2004 XC70.

Here you can get 430 hp to that 1998 Volvo v70r 2.3 awd without any changes, because it is the most powerful of the model series to which other Volvos of the same type are compared. An addition to the previous one -I also made a gap interpreter in the block of the mod. -How does narrowing the plasti...