The roof rail covers are clipped in. The clips are plastic and can break so expect this may happen. The clips are held into the roof with screws and under the clip Volvo used a butyl strip to seal the hole and it heals around the screw when you screw the clip down. The covers were a vinyl type mater...

DennisCA wrote: ↑26 Nov 2024, 03:32 Do you have the new oil seal? You will need one of those.



Motonet or similar will have them.

For the CamShafts? I got yesterday.

viewtopic.php?t=62436

Looks like early B5254FS didn't had that hose for pcv on top of valve cover.

BeerDeer wrote: ↑16 Dec 2024, 14:19 ...
It seems that the root cause of all these issues is the oil and condensation leaking into the rotor cap.
...

Yes!

100% agree, no need to mess with anything else until that's fixed.