My MVS t-shirt arrived. Already, I have obtained more youth and energy. Just look at that air intake work in the background. Could only do it with MVS.

Show us your MVS t-shirt, perhaps with a car project, wrench, gained energy, etc.

Hello, multiple images attached to a post are shown in reverse order of their file names. This especially hurts people who are posting a walkthrough and their filenames are timestamped since it shows the pictures in reverse order of their text instructions. This happens when the images are not inser...

Hello Forum! Wanted to say "HI" to the group...just drove a 98 V70 AWD up from Marco IL FL to Chicago IL over the weekend and am getting to know the car. The Skinny: 71K Miles (not a typo) Nautic Blue/Tan 1 Owner, all service records (And the Monroney Sticker!) - Tons of work done exactly ...

I have a 1999 S80, currently fighting with a damn canbus issue for months now, but if i can solve it in reasonable budget i think i will going to do a LOT of work on the car and put it in my garage to keep it, it has only 130k miles in it. I will indeed make a lot of pictures, i think all the above ...

This post is from 2012 on how to replace the VR in situ ... In order to see all the bolts and the layouts of the parts, BEST is to see how it is done with alternator on the bench. Once you see this on-the-bench video, you will know how to do it in situ w/o the need to remove the alternator from the ...

Just a tip that I found serves me well. I glued a small magnet into inside of the door area that keeps it gently closed so it would not fly open if the latch lock failed or even the gas attendant did not close the door properly.

I know this is an old thread but it’s still being accessed, so I offer some additional info that has taken me 3 weeks to work out;  there are several different fuel control systems on P2 V70s, XC70s and XC90s dependant on year/month. the system often discussed has a PEM (or FCU) which controls fuel ...

No. 940 has a cowl with slits and wipers going through it.

960 is smooth all the way back.

Hello all, Ive decided to start a build thread focused on making 3d printed parts for our Volvos. I'm placing this thread in the P80 forum since most of my designs for the foreseeable future will be focused on my 850. I do have an XC90 but shes in mint condition and will not likely need any 3d print...

Sale history, to find a pattern and predict future sales: 2025: 3/17/25 to 3/23/25 - 10% off <$200, 15% off >$200 7/1/25 to 7/7/25 - 10% off <$200, 15% off >$200 for Independence Day 2024: others in late 2024? 8/29/24 to 9/3/24 - 15% off for Labor Day 7/1/24 to 7/5/24 - 10% off <$200, 15% off >$200 ...