Well I found some crispy wires finally. Didn’t occur to me that I’d have to look up into the sheathing where they are completely protected to find where they’d gotten hot to the point they then became crispy. I tried to upload a video but was unsuccessful. Here’s a few photos. Would it be simplest t...

i wrote small calculator for P1 platform, which can change equipment options of the car. But you have to read and write one of motorola MCU with some programmer. Contact me if needed

111psi? That sounds crazy for regular electric injector system. If you would have direct injection i would say it is too low..but currently I would be questioning fuel pressure sensor. I heard that they are as reliable as water pump on f150. So for $35 I would be replacing that first(might be parts ...

Same cutout while accelerating on my 08 S60 2.5T a while back — was the pressure sensor on the fuel rail, easy fix with Schroeder valve there to drain fuel pressure and swap out.

Following, also curious about NA performance stuff. TSP in Sweden makes high-lift cams for turbo cars, but not NA as far as I know. As far as reliability, it's probably a pretty bad idea. You'll get way more power reliably (and more cost effectively) if you just buy a turbo car.

i wrote small calculator for P1 platform, which can change equipment options of the car. But you have to read and write one of motorola MCU with some programmer. Contact me if needed What's the link I have a number of p1 cems , what mcu's does it cover ? I tried many differend BIN files, e.g. 2011 ...

The video's that I found, some more useful than other:

This is not a sale but a warning. Tariffs threaten to increase prices on goods by double digit percentages. Consider buying parts now before prices rise. I'm already seeing FCP prices up 5-10% since my last orders in 12/2023 and 3/2024. In 2022, I watched inflation drive up the price of parts at FCP...

Do you have any knowledge if removing this system would require a re-tune on the ECU? My car had that originally but sadly the solenoid is missing and I would like to remove it (for some performance gains). My plan is to change the intake manifold with one that doesn't have that system. The formal ...

Icarsoft will not help you here IMHO. It is a great easy to use tool during maintenance and code read/erase but when it comes to more serious work it is not good. You need to decide what is of priority here. If you need car to be operational asap-call "volvo towing" for free 25miles and br...