As mentioned, I used the shorthand method of agreeing with the sage advice offered by others.
Here is the cam lock tool I use.

Posted this over on the 'found' thread too
https://martinsburg.craigslist.org/cto/ ... 55176.html

'96 850GLT near DC, big ask but way low miles and looks right clean.
https://washingtondc.craigslist.org/nva ... 64695.html

At first thought, the cheap timing belt would be OK for a non interference engine like some red blocks. Second thought was, no it is too much effort to change the belt if it fails. Get the good stuff and forget about it for 100K miles. volvolugnut The jaw-dropping lunacy of them selling anything fo...

I would cross the country with that “ leak” , let alone a brief saunter down Route 5 now the coolant was one inch higher in reservoir that when cold after warming up on a trip to town. Block tester fluid remains blue but I can see there is new volume added to the coolant space . freaky looks very b...

mdr1220 wrote: ↑26 May 2021, 15:19 I'm in bmore, please post pics please. There's nothing like a scavenger hunt.

I sent our new neighbor a PM suggesting the ad be fleshed out, and of course some pictures. Hope we hear back soon.

Ok cool. Let's try the bypass first.... I will do a search. If anyone has a link, that would be helpful. Thanks! As you can see from the thread, it's an elimination with extreme prejudice (movie quote!), as opposed to a temporary workaround. If you troubleshoot the issue and it is the pump I have o...

abscate wrote: ↑29 May 2021, 05:43 Why do so many cars on TAB have no reverse?



Dylsexia is a real condition, see your Dentist.

Reminds me of the story about the dyslexic agnostic insomniac who laid awake all night wondering if there really was a Dog.

I am not trained in the Mental Health area, but... https://raleigh.craigslist.org/cto/d/raleigh-1993-volvo-240-wagon/7339982978.html At the minimum it's dillusional. The last two Bricks I changed blower motors on took every bit of seven (7) hours. This one needs not only the listed issues, but a pai...

All Stop, Matey ! I couldn't find the box with the leftover piece - naturally - so I put on some pants and drove to Autozone. This is what you want. Remember to warm up the line, and you will need to trim ca. 1/4" off to leave a little space for the center of the barb. I didn't bother putting a...