Looks like I picked a bad week to stop sniffing glue from a tumbler

[/quote]

I had the spinning issue, but it was simply down to very worn key profile. Problem was the fix is what you can't do. Swap the keys. You mention you have 3 keys. Do they all have a problem? Another option is to take an existing coded key and hide it up in the dash and then get a couple of regular un-...

Silicone hoses are nice but be prepared for a fight to get them installed.

matthew1 wrote: ↑01 Sep 2021, 19:10 ... unless they're really, really big.

Torrent server ... users can share the bandwidth load.

Don't bother with the poly inserts.

As someone who's used them a couple of times, just do the Delrin ones if you're doing them at all.

I think you might be right about just replacing the bushings and it's not that much money. Thanks for helping to nudge me in that direction I can replace them without having to drop the sub right? Just a little drill bit action on the plastic to remove the old ones or so I have read. Will it necessi...

Okay guys, this is one of those where I was an idiot. I should have noticed the fact the plug showed 5vs. good news is the wiring for the ac pressure switch is working perfectly, bad news is if youve had one too many natty lights you can swap those plugs. When I put them in the proper place both sys...

Well done anyway. We have all had that moment (some cases many more than once!). It is unfortunate that the physical shape allows them to be swapped over in the first place. Glad you got is sorted.

Neil.

They leak amd seep before failure , Firefox , so the Scot in me says wait fir the failure to squeeze every last penny. For someone fastidious like you who watches their fluids carefully, that model works best.

I don’t think the NA runs the oil cooler in 2000, turbo only

It’s one Imperial inch for that height limit

Raise engine:
Raise engine max 30 mm. Use jack tool No. 998 5972, or equivalent.
Remove two engine mount bolts and slacken the third bolt.
WARNING: The inner, left constant velocity joint will be damaged if the engine is raised by more than 30 mm .