My advice is install the XeMODeX now and ship the failed ETM back. You get the core credit and should have trouble free operation (and the slight improvements) for a long time.
I think the XeMODeX failure was a fluke.
volvolugnut
Search found 113 matches
- 09 Nov 2020, 09:16
- Jump to forum
- Jump to topic
Sorry for the downtime last night/this morning
As usual, trying to make things better made them (temporarily) worse
.
- 10 Dec 2020, 18:16
- Jump to forum
- Jump to topic
- 29 Dec 2020, 17:31
- Jump to forum
- Jump to topic
Re: 2013A XC90 - Exhaust after POR-15 44316 Aluminum High Temperature Paint
Soak the expletive out of it with Fluid Film sprayed from a rattle can. You could also use Woolwax, although I have never used it. Fluid film smells like sheep. Woolwax isn't supposed to have much odor.
- 09 Feb 2021, 04:42
- Jump to forum
- Jump to topic
Re: After Cold snap, no power.
Popped the hood, the OUTLET hose of the intercooler, including the idle air hose, is flattened, and squished. BUT. The out let of the turbo is still holding it's shape. I'm stuck. Any ideas? Blocked Intercooler weep hole. Water in the Intercooler phase changed into ice and blocked the air flow. Tha...
- 22 Feb 2021, 12:45
- Jump to forum
- Jump to topic
Re: Strange noise on startup in cold weather
Xheart, I started and idled my S80 3.2 and LR2 3.2 yesterday (to confirm cooling fan function) and I checked to see if my PCV was making noise. Note: It isn't cold here possibly high 40s or low 50s for the low For both of my 3.2 a noticeable noise was present when I removed the oil fill cap or dip s...
- 09 Mar 2021, 16:51
- Jump to forum
- Jump to topic
Re: $10,000 S80 Challenge
Re: Passing CA Smog Test with an EVAP leak If you're coming due for Smog, and are dealing with an EVAP leak code, just knowing that the Volvo engine software only runs the EVAP System Test when the fuel tank is >15% and <85% full offers you an easy "PASS". You need an OBD-II scanner that c...
- 15 Mar 2021, 03:48
- Jump to forum
- Jump to topic
Re: Fluids disposal questions
Where am I suppose to dump this stuff properly? Separate it first. 1. Pour the mix in s 5 gallon bucket and let it sit for weeks with the lid on. ( Water being heavier will sink to the bottom ). 2. Place a shim under one side of the bucket. 3. On the other side of the bucket, poke a hole near the b...
- 19 May 2021, 08:46
- Jump to forum
- Jump to topic
Re: 2001 V70XC - Intermittent ECM 4801
Yes they do, about 2/3 down listed page






