vtl wrote: ↑12 Aug 2021, 14:03 Volvo is going to discontinue "allowance" of the pirate DiCE units altogether, soon.

Actually, if you download VDASH, For around $20.00US it updates the firmware with a serial number so it appears as an authentic DICE to VIDA.

Make sure you take the owls out of the cylinder head, too

I think part of the answer depends on how comfortable your friend is with maintenance and repair. I'm ok bargain shopping on something that has had regular maintenance but needs a few repairs. Others want a pristine example. Just have to budget for what you are getting. The 08 S60 2.5T I just bought...

It is 2007 S60R. I attached 2 pictures of the cracker. Bingo! You got the CAN LS -L and the CAN HS -L connected to Signal ground and Chassis ground ( Green wires ). CANHS = CAN High Speed, CANLS = CAN Low Speed. -H = the high side of the CAN bus, -L = the low side of the CAN bus. The low side of a ...

Hello all, Naturally, this will happen just before forecasted precipitation. If you don’t have time to fix it properly (which most often is to replace/repair the siren/alarm module), or simply don’t care if the sunroof is operational & just need it closed, here is how to do it manually. Remove p...

A large contractor garbage bag and packing tape is in the tool kit if every car in our fleet 1 something to lie on in wet weather 2 gathering up body parts from toxic dates 3 wrapping up road Volvo parts to carry home 4 taping stuck windows and sunroofs .put anX of packing tape over the roof to stop...

I took a vanity shot just prior to crossing the 300K border, turned out kinda cool :) (this is more current, and not as cool). I’ll see if I can find it. Oh, are you getting the “NO OIL PSI, STOP IMMEDIATELY” message in the DIM or the red oil psi light? If the former, I would heed all notions & ...

Source found here.
7f 27 35 (Invalid key.)

Great explanation, vtl, and thank you for the link. Now I follow what's going on. Very clean code. I'll take a look at that link and see if it's something I can use. Trying all of the bitshifts in C++ keeps giving me overflow errors. I thought cleaning up the Algo the way I have and coming up with 0...

Whenever you have a Phillips or Torx screw that is so tight that you fear stripping the screwdriver slots or torx pocket when loosening, here is something that often helps: take a drift punch that is narrow enough to reach the bottom of the slots/pocket and give it a few good raps with a ball peen. ...