By the way, this is solved, problem were worn rear suspension mounts/bushings.
After replacing all 4 the car drives fine

Picture

Picture inline, copied to MVS server:

Auto axles are different, in at least for the balancing weight that is attached to the driver side.. I wouldn't buy them from an austrian junkyard btw - I did that once and had to return it - it was bad too. Most of the cars ending up there are already completely worn out. I'd recommend ordering the...

Relevant update: I was having issues with the IPD tcv not being responsive enough and began looking for alternatives. I read about people replacing it with differnet tcv's from other cars... so I decided to order a modern Volvo TCV - Pierburg Volvo PN 9465528. The connector is the same, the ports ar...

Wouldn't say it is junk, but it is not as good as they say.
Maybe still better than the original one from '95.

I doubt mine is bad due to old age, i don't have it that long.

Btw, this is where I placed it. Extended the cable and reused the IPD bracket since I already had the holes for it. It is aslo much smaller than the IPD valve which makes installation easier. After driving with it for some time I have to say the difference is huge. Before boost control was pretty mu...

If you have to remove them anyways think about getting them serviced or replace with serviced injectors. The originals in my car were not very good it seems, I replaced them with serviced injectors, the engine even sounded very different after that.

I have the 2l 10v engine, however did not have to do the pcv yet on this car. https://www.volvopartswebstore.com/showAssembly.aspx?ukey_assembly=234413&ukey_make=865&ukey_model=11974&modelYear=1998&ukey_category=7072&ukey_driveLine=478&ukey_trimLevel=24656 have a look there, ...

The AC Delco aren't readily available in europe (at least when I tried to find them). The Pierburg are also used by a range of other european manufactuerers. @jreed I guess you can use the even newer parts, (it looks exactly the same as the one I used) - I think als long as they have 3 ports they mo...

To answer my own question; seems like no

Thank you for your inquiry, however moving forward at this time we are a wholesale only tuning/parts provider.

We are in the process of transitioning tuning/parts for end users to a provider that we'll announce as we have more finalized details.

viewtopic.php?f=5&t=91843

thats the response I got.