Do you mean number 10 in Manov's image, sitting beneath the upper spring seat in the top left circle? The item pictured here? Nivomat (L) and standard (R)? If so, I have also had clunks from these loosening. https://live.staticflickr.com/65535/50404972648_3c09c1da7d_b.jpg That’s the part! The diagr...

THread like these make you realise that frozen bolt you have been swearing at isnt that important

Green smoke..frogs in the fuel tank

Blue smoke..the car has been used for smurfing

Orange smoke....someone put Tang in the Tank

Have them send you a picture of the label so you can see the build date. If you look in the ETM forum down below, you will find the date where Volvo starting shipping replacements from Sweden with a universal software that should work. https://www.matthewsvolvosite.com/forums/viewtopic.php?f=1&t...

I've already replaced the fuel pump right after I bought the car. Where is the PEM located? My car is rust free, surprisingly with the salt they use on the roads here in the winter time. I see newer cars all ate up with rust, yet my car is spotless. Even when I changed the fuel filter the bolt and ...

The small nuts were barely tight when I was trying to get the strut off, and I torqued them down to 33ft-lbs and stripped the bolts that the little nuts are on. Does anyone know what the actual torque specs are so I don't mess up the other strut when I do eventually get it on? Also the torque specs...

...and i think this job is going to take a long-long time....

You have to bring over the 1998 brackets as the mounting for the PS,alternator, and AC compressor are completely different.

Make sure you get the rotor plate in right, a good friend of mine chased this for a month recently.

There are lots of $20 OBD solutions but SRS IS not an OBD standard function.

You need the $150 version of most Product lines to get the SRS clear function.

Milky Way. I think