Abscate, Could you please clarify? Do you mean you have two vehicles, each with over 250K on a clutch? If so, that would allay any concern I might have about clutch/flywheel longevity. Jim Clutch life comes down to how it is driven , not the parts. V70 T5 1999 still on original clutch, 256k miles V...

Nobody mention thst the Audi sign isn’t Centred on the blocks. …..

Scotland - the Romans were too afraid of the Scots so they built a wall and told themselves nothing was up there, no reason to go..

A nice deep rub of CONNOLY’s leather restorer has given it that nice Rolls Royce smell of luxury… Which Connelly's product do you use for the leather and where do you get it? I watched a video on it, apparently they used it to condition the seats in the Concorde regularly. Good stuff https://www.am...

Krons wrote: ↑25 Mar 2025, 16:40

Sveedy wrote: ↑25 Mar 2025, 15:55 IMG_20250325_144810590_HDR.jpg

What does a stamp for a letter cost?

We can do that but a business can’t ship merchandise in a “ letter” ' technically. One would think a small cardboard envelope would make more sense.

Just set the tensioner in the middle of the range to start. A 6mm hex key is perfect for the adjuster. Remember you go past the middle position , the ease off and come back to it per Volvo. Turn the belt through two revs once on by hand , then set tensioner with engine off, before starting The setti...

Worst one I ever had…4x4 long timber under car, propped to bear on wheel, then sledge from other side

Well, stop the presses. I managed to put hands on both sets of the Volvo seals I thought I had in inventory, so one will head off down to TExas tomorrow. We would love to guinea pig the Elrings - but Robert has already done that, and they dont last. In case you were wondering about doing the seals f...

I use alldata for my fleet as I can run it on a phone or pad, from anywhere in the world.

3 year subscription is $112 with discount , which is 1/3 hour labor per year. Bit more than it used to be but frankly it was underpriced before.

Use coupon code ‘no joke’ to get the discount

The definitive way to check an ETM is a sweep-test in VIDA, not really a good subsitute for this.

The white label 2017 sensor is contactless and shouldnt be failing in 8 years, so I would check connectors and other stuff first.

See the thread on the ETM room Forum for the right part number - you want the same one you have above.