All finished with the replacement. Not an overly difficult task, either. I've got the write up on my blog (see signature), and once I upload the images to Imageshack I'll post it here. Hopefully it'll go into the database, if not, I hope some other enterprising individual finds it useful. Thanks to ...

Since I didn't get any replies to my questions above, I decided to remove the pump motor to see how brake fluid was getting to the spade pins that supply power to the motor. I've attached a pic that shows the brake fluid pooled up in the pump manifold bearing well and also covering the top surface o...

Here are some starter threads, be sure to not use the US 99 pinouts as they are different from US 98 (US 98 same as your 97):

viewtopic.php?t=89551
viewtopic.php?t=63948