Finally! For a few cars recently I did not have a clue. This one is easier for me:
1971 Monteverdi 375/L High Speed Coupé by Fissore
Neil.
Search found 927 matches
- 02 Mar 2025, 13:20
- Jump to forum
- Jump to topic
Re: Let's play Name That Car
That car is awesome. If I lived in Monaco I'd drive one of those, and all the F40 drivers can watch in envy. And I'd have an F40 at home, oh snap. And a 308 GTO.
- 03 Mar 2025, 15:01
- Jump to forum
- Jump to topic
Re: A $100 '99 V70 GLT
Decided to tackle the drivers side door issues today. A previous owner had sprung the door so badly that it had scuffed the door trim on the fender, as well as making a hellacious noise when being opened or closed. When I took the door off, I found a gaping hole where half of the door check should b...
- 04 Mar 2025, 13:25
- Jump to forum
- Jump to topic
Letterman and Stewart talk about Paul Newman's V8 965 (1995)
STEWART: ...what has been the coolest thing that's happened to you while you've done your show? LETTERMAN: Well, you know, you'd think being in show business, or as close to it as I've come, you ought to have a lot of cool things happen to you. STEWART: Sure. LETTERMAN: And I've thought about this a...
- 05 Mar 2025, 04:56
- Jump to forum
- Jump to topic
Re: Essential tools for DIY Volvo care.
Can you push out all the old brake fluid by flushing it through? There’s no low point where you can just drain it, and you’ve got ABS piping. Remove the caliper, open the bleeder, push piston(s) in. Start bleeding line normally (with a bleeder). The remaining old fluid will be a tiny drop in passag...
- 06 Mar 2025, 07:06
- Jump to forum
- Jump to topic
P2 PCV Replacement - Notes for the Uninitiated (from the recently initiated)
Hi Everyone, I just wanted to call out a few things I encountered during my first P2 PCV replacement. Things that delayed the process by days and challenged my sanity at times. Apologies for any redundance - I did read quite a few threads on the topic and used several youtube videos as reference so ...
- 09 Mar 2025, 12:50
- Jump to forum
- Jump to topic
Re: P2 PCV Replacement - Notes for the Uninitiated (from the recently initiated)
All very wise words and exactly the same troubles I experienced. Right down to the pintle caps. Only suggestion and tool that really helped me this job was a small maybe 4” box wrench 17mm to get that banjo bolt out. Job probably took me 4 hours and was lucky enough my local Carquest had a nice copp...
- 09 Mar 2025, 13:44
- Jump to forum
- Jump to topic
Re: Welcome to the S60, V60 and XC60 Forum!
Spent several hours helping my ex-Volvo mechanic friend to remove the engine short block from his 2012 S60 T5 FWD. What a pain they are to work on. He was convinced the engine could come out the top without removing the trans. After many hours and questioning his belief on the engine coming out it d...
- 11 Mar 2025, 11:07
- Jump to forum
- Jump to topic
Re: Non-Volvo car chat megathread
Wow ! Very nice !
Even has a double roller chain. Love the finned pan.
Even has a double roller chain. Love the finned pan.






