Car Alignment Tricks Using Common Tools --------------------------------------------------------- I just did the Alignment Tricks Using Common Tools. I tried it on my 1998 Volvo V70 and it works perfect!!! So here is the DIY. The key thing is to define the axis of the car by making parallel lines a...

So is the rule of thumb one beer per cylinder?
If I want the whole six pack I have to work on the XC90?

Here are the pictures: 2000 V70 5 speed auto RH axle 001.JPG 2000 V70 5 speed auto RH axle 002.JPG This and the picture below show the bearing is well supported and does not appear to move in the carrier support 2000 V70 5 speed auto RH axle 003.JPG 2000 V70 5 speed auto RH axle 005.JPG Above you ca...

Remembered this from doing the 1999-on PCV You put the banjo on the fitting, with the two copper washers, then you put a sacrificial orings on the bolt to hold it together. Once you get the banjo started, snip the oring and pull it off. You can also snag the oring with a pick and pull it off until i...

Suddenly I had p0455 "gross leak" failure on the evap system. I also thought the idle was slightly less even. Following much of this site's information on the J hose and L hose connected to the charcoal canister I found two small cracks on the L hose. I had previously solved my first P0455...

Look further down this web page...
"SIMILAR TOPICS"...

Hopefully this link will help:
viewtopic.php?f=1&t=82220&p=446142&hili ... or#p446142

Old thread alert.

I am trying to think why would you need to change the ECU. I can't think of a reason to as there is nothing in the engine that is unique. The only things are linked to the ignition switch and the ignition keys and alarm system. The ETM should also be ok. Any on want to add to this or tell me I am fu...

Hi, I'm wondering if when doing an engine swap on a 2000 Volvo V70XC with another 2000 V70XC it is necessary to transfer the ECU from the donor engine? It is not necessary to transfer any electronics between the two cars. If you can avoid transferring any software driven electronics between the two...